How to apply the Anti-fog nanocoat

Step 1: Preparing the surface

Make sure the surface is as clean as possible and free of any lint or other residue.

Step 2: Applying the Anti-fog coating

Doing 1 square metre or 3 square feet at a time, spray the nanocoat across the surface. You only need 2-3 sprays for this area size. Using the dry microfibre cloth provided, spread the nanocoat around in circular motions until the area is completely covered. Allow 1-2 minutes for the nanocoat to dry.

Step 3: Post application

Once applied, try not to disturb the coating in any way. If you attempt to clean the surface or splash it with water, this will degrade the coating. 

How to remove coating

To remove the coating simply clean the surface using any multi-purpose spray or glass cleaner.


IMPORTANT: The wearing of gloves is recommended. Please ensure the area being treated is well ventilated. Do not store in direct sunlight. Store in its sealed container with the trigger switch off and keep away from children and pets. In the event of eye contact, wash out immediately with water. Do not swallow or inhale. Seek medical advice if necessary.