Your Cart (0)
Free Shipping On Orders $79+
Your Cart Is Empty
Create a cleaner, glass surface with Glassguard today!
Glass Restoration Stain Remover Support Information
Product Overview:
GLASSGUARD™ Glass Restoration Stain Remover 2.0 is a powerful solution designed to effectively remove stubborn stains, mineral deposits, and soap scum from glass surfaces. It's especially useful for restoring glass to its original shine and clarity, making it look like new again. The product is compatible with a wide range of glass surfaces, making it a versatile addition to your cleaning toolkit.Application Instructions:
For best results, shake the Stain Remover bottle for approximately 10 to 20 seconds. Pour a small amount of the Stain Remover liquid directly onto the included Scourer Pad. Apply the liquid to the glass surface using circular motions with the Scourer Pad, ensuring the entire surface of the glass is covered. Leave the Stain Remover on the glass surface for approximately 10 to 20 minutes to allow the active ingredients to work. After the wait, you may want to go over the glass surface again using the Scourer Pad if the stains are still prominent.
Safety Information:
The product contains 20% cerium oxide and 5% citric acid. While these ingredients are effective in cleaning and protecting glass surfaces, they should be used with care and caution. Keep the product out of reach of children and pets. GLASSGUARD™ products are not to be consumed. If swallowed, seek medical advice immediately. Avoid contact with skin and eyes as the product may cause skin and eye irritation. In case of contact with skin, wash with soap and water. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice if symptoms persist
Efficacy and Performance:
This product has received positive reviews for its effectiveness in removing tough stains, including calcium, limescale, soap scum, water spots, dirt, and rust from glass surfaces. It is also known to restore glass, ceramic and tile surfaces back to a new condition.
Troubleshooting:
If the gel is hard, try shaking the bottle vigorously before use. If the gel is too runny, it might have been stored improperly or it could be a defective batch. In such a case, it is advisable to reach out to the customer support for replacement. If there is no hole in the nozzle, it could be that the seal has not been removed or punctured. Use a sharp object to create an opening. If the product did not remove mould/stains, you might have not left the product on the surface long enough for it to act or the stain might be too old and stubborn.
Product Lifespan:
The typical lifespan of the GLASSGUARD™ Glass Restoration Stain Remover is approximately 2 years from the date of manufacture when stored correctly. This is subject to the product being stored as per the guidelines, which include keeping it in a cool, dry place and ensuring the lid is securely fastened when not in use. It's recommended to check the product consistency and smell before use if it's been stored for a long time, as any significant changes may indicate that the product is no longer effective and should be disposed of.
Maintenance:
After the stain removal process, it is ideal to apply GLASSGUARD™ Nanocoat DIY Kit to protect your surface from future dirt, grime, mould, mildew, and other stains. This non-stick coating helps your glass to stay clean for longer and makes it easier to maintain.
Environmental Impact:
The product is eco-friendly, made with plant-based ingredients and free from harsh chemicals, making it kind to you and the environment.
Compatibility:
GLASSGUARD™ Glass Restoration Stain Remover is suitable for use on glass surfaces. For specific types of glass or other materials, it is advisable to perform a small patch test to ensure compatibility.
Product Line:
The GLASSGUARD™ product line includes the Glass Restoration Stain Remover, the Stain Remover + Drill Scrubbing Pads bundle, and the Glass Restore & Protect Kit. These offerings cater to a variety of cleaning needs and intensities, providing a comprehensive solution for maintaining glass surfaces.
FAQs:
What kind of stains can GLASSGUARD™ Glass Restoration Stain Remover remove?
GLASSGUARD™ Glass Restoration Stain Remover is effective in removing tough stains including calcium, limescale, soap, scum, water spots, dirt, and rust from glass surfaces.
How long does it take for the Stain Remover to work?
After applying the Stain Remover, let it sit on the glass surface for approximately 10 to 20 minutes to allow the active ingredients to work.
Can I use GLASSGUARD™ products on any type of glass surface?
Yes, GLASSGUARD™ products are designed for all types of glass surfaces. However, for unique or specific types of glass, we recommend testing on a small, hidden area first.
Are GLASSGUARD™ products safe to use around children and pets?
GLASSGUARD™ products are made with plant-based ingredients and are free from harsh chemicals, making them safe to use around children and pets. However, they should be used as directed, and stored out of reach of children and pets.
How often should I use the Stain Remover?
Usage frequency can vary depending on the level of staining on your glass. For heavily stained surfaces, you might need to apply the product more than once. Regular maintenance can prevent heavy staining.
How long does the protective effect of the Nanocoat DIY Kit last?
Our GLASSGUARD™ Nanocoat DIY Kit provides a non-stick coating that lasts for 5+ years, helping your glass to stay clean for longer and making it easier to maintain.
What should I do if the Stain Remover does not remove the stains completely?
If the stains are still visible after the first application, you can reapply the Stain Remover and let it sit for an additional 10 to 20 minutes, then rinse or wipe clean.
Can GLASSGUARD™ products be used on surfaces other than glass?
GLASSGUARD™ products are designed primarily for use on glass surfaces. However, they may also be effective on certain types of ceramic and tile surfaces. Always test on a small, hidden area first.
Are the products environmentally friendly?
Yes, GLASSGUARD™ products are eco-friendly. They are made with plant-based ingredients and are free from harsh chemicals, making them kind to you and the environment.
What sizes does the Glass Restoration Stain Remover come in?
The Glass Restoration Stain Remover comes in three different sizes: 250ML, 550ML, and 1100ML.
