How to use our GLASSGUARD® Miracle Mould Removal Gel

 

IMPORTANT: Please ensure the area being treated is ventilated. Do not store in direct sunlight. Store in its sealed container and keep away from children and pets. In the event of eye contact, wash out immediately with water. Do not swallow or inhale. Seek medical advice if necessary.

Please refer to knowledge article for surfaces to avoid:  What surfaces can I not use the Miracle Mould Removal Gel on?

Step 1: Applying the Mould Removal Gel

Make sure the area is well ventilated before use.

Keep the surface dry and clean.

Give the Mould Removal tube a good shake for 5-10 seconds.

When opening the product, make sure you completely remove the foil covering the cap before attaching the nozzle.

Unscrew the nozzle cap off the end of the nozzle.

Apply the gel evenly across the mouldy area and leave the gel for 3-5 hours.

Step 2: Removing the Gel

After 3-5 hours, the gel should be solid. Wipe or remove the gel from the treated area with a damp cloth or your hands if you are wearing gloves.

Rinse the treated area with water or wipe with a damp cloth to remove any remaining gel residue.